My Network Address

admin 1/17/2022
43 Comments

Determine the IP Addresses of the Network Hardware on Your Network. Before you begin, find the default gateway IP address for your computer's network connection. In most situations, this is the private IP address for the router, the most external point on a local network. How to Find Your Router’s IP Address on a Mac. You can find your router’s IP address on a Mac in two ways. First, you can open System Preferences, click on Network, and then see the connection details on the Ethernet or WiFi panel. Or, you can launch the Terminal app, type netstat -nr grep default, hit Enter, and look at the default IP. NAT stands for network address translation. It’s a way to map multiple local private addresses to a public one before transferring the information. Organizations that want multiple devices to employ a single IP address use NAT, as do most home routers. How Does NAT Work? Let’s say that there is a laptop connected to a home router. Advanced IP Scanner. Reliable and free network scanner to analyse LAN. The program shows all network devices, gives you access to shared folders, provides remote control of computers (via RDP and Radmin), and can even remotely switch computers off. A public IP address is a unique address provided by your ISP (Internet Service Provider) to identify your local network on the Internet. If your computer is connected directly to the Internet with no router sitting in between, your computer’s IP address is a public IP address. A private IP address is assigned by your router to a PC or device.



DO YOU WANT YOUR NETWORK CALCULATOR?

If you have a personal site or blog, you can add a mini version of network calculator like this one (see mini calculator). You only have to copy this code.

My Network Ip Address Location

IP ADDRESS

Initially your IP address is displayed, the real IP from which you connect. This IP can be modified to perform subnetting.

How To Find Your Network Id

MASK

Initially the network mask is shown according to IP ADDRESS Class for calculations of classful networks. But if you want to perform subnetting with VLSM (Variable Length Subnet Mask), it can be modified. Select the network mask in the format you want, because you have three different formats for the election of the netmask.

NETWORK ID

Displays the network as defined by IP ADDRESS and MASK selected in the above fields.

HOST RANGE

Gateway

Shows the range of IP address belonging to the network, which can be configured as hosts.

BROADCAST

Displays the broadcast address of the network. This is a special address that points to host all active hosts on the network.

How To Know My Network Address

TYPE

Shows two implicit characteristics of IP ADDRESS, Public IP or Private IP. Private IP's are those that belong to the following range of IP addresses

IP addresses rangeNo. of addressesDescription
10.0.0.0 - 10.255.255.25516.777.2161 x class A
172.16.0.0 - 172.31.255.2551.048.57616 x class B
192.168.0.0 - 192.168.255.25565.536256 x class C
169.254.0.0 - 169.254.255.25565.5361 x class B

My Network Mac Address

Class of the IP address makes sense in Classful networks and it is decided according to the following table

CLASSLeading bitsBit field size of networkStart addressEnd address
A080.0.0.0127.255.255.255
B1016128.0.0.0191.255.255.255
C11024192.0.0.0223.255.255.255
D (multicast)1110not defined224.0.0.0239.255.255.255
E (reserved)1111not defined240.0.0.0255.255.255.255

HEXADECIMAL

Find Ip Addresses On My Network

Displays hexadecimal conversion of IP ADDRESS.

BINARY

My Network Address

Find My Network Address

Displays binary conversion of IP ADDRESS.

Using color coding can visually see the bits of IP ADDRESS that identifies the network, subnet and host.
- bit identifying the network
- bit identifying the subnet
- bit identifying the host

SUBNET CALCULATION

Here you can configure the parameters for subnetting calculation. You can select the subnet mask that will always be equal or superior to the original network mask. You can choose the number of hosts that can connect to each subnet. Or you can choose the number of subnets you want. All these parameters are interdependent. So if you change one, the other will change. By pressing the LIST button all subnets will be listed in a pop-up window.


network-calculator.com © Adrián del Castillo. Todos los derechos reservados
kesedebe.com