Ip Address Modem

admin 1/4/2022

Every desktop and laptop computer, server, scanner, printer, modem, router, smartphone, tablet and smart TV is assigned an IP address, and every packet (Web, email, video, etc.) traversing an IP. But, like a router, a broadband modem is a computer with a web based user interface. And, like any device with a web interface, the modem has an IP address. You might think that to address a modem. To find your modem’s IP address on Windows computers; Click the Windows Start button, type 'cmd' in the Search box and press 'Enter' to open the Command Prompt. Type 'ipconfig /all' in the Command Prompt and press 'Enter' to run the command.

One type of popular and well established modems are Motorola Surfboard (Arris) Modems. These modems have been a popular choice for both cable providers and users who purchase their own. Accessing your modem can give you a good indication of possible issues arising from inadequate signal strength or too much noise on the line that will affect the connection.

Pldt ip address modem

By accessing the screen pages inside your modem you should be able to gain some information on your Internet connection. Two important pages are the Status page and the Signal page, both showing a snapshot of information about your current Internet provider's Internet signal strength and potential possible issues that could affect your connection and ultimately your VoIP service.

Steps to access your Arris Surfboard Modem and check signal levels to troubleshoot your connection.

  • Start by accessing your Arris surfboard cable modem by opening your web browser and using the IP address of (This address is also used for older Surfboards.). Once open it should show you The default page the Status page. The most important information on this page is The Cable Modem Status which should show Operational. If a Failed appears above this information and the modem does not show Operational then the modem has failed to sync with the Cable Provider and is not connected. An Operational modem can also be determined by looking at the modem indicator lights with the Online light being solid.
  • The next page to get useful information and probably the most important one is the Signal page which will show certain power levels which can give an indication of a problem.

Ip Address Modem

Information when troubleshooting cable modem signal levels.

Poor signal levels result in- Signal levels that are not in the acceptable parameters listed above can cause loss of connection, slow speeds and connection issues, including failure of one of the steps needed for registration with the provider, packet loss or the need for packet retransmission.

Arris Modem Ip Address

Premise hardware- On premise hardware including splitters, bad connectors, and poor quality cabling will effect cable signal levels and can cause problems. The cable modem should be a direct line from the first splitter using the leg with the least dB loss. This will allow the best level of signal from the cable box at the premise to reach the modem.

Ip Address Modem Huawei

Signal level variation- Checking the modem's signal levels is a snapshot of those levels at that time. Weather and the change of temperatures affects cable hardware which can reflect in variations of the levels at the modem. It is recommended that for best performance some headroom is included in a modem's levels of approximately 3dB. Additionally, when checking the modem and finding variations that occur in a short period of time, where the signal level readings are varying sporadically is a cause for concern and may point to an issue that needs to be corrected.

Ip Address Modem Or Router


Comcast Modem Ip Address

Best Solutions